I've decided to improve my rubbish DIY skills by creating a wooden height chart to mount on the wall of my kid's bedrooms.
But this won't be just any wall height chart. For each measurement, we'll add a photo of that day and attach it to the wall chart.
Not only that, but as I have extensive video editing experience, basic Photoshop experience, (and all the required tools), I'll also create an animated 4K video slideshow (one separate set for each year) and burn them onto printable blu-ray discs (along with proper blu-ray cases and custom-create case covets).
I'll then keep the blu-rays on a shelf that'll be attached to the top of the wall chart (one disc per year up to the age of 18).
I have some reclaimed pallets I can strip for practicing on and my wife has agreed to help with any art (numbers, drawings, etc.)
I'd like to use this topic as a place to garner feedback from woodwork pros like
@nubby or anyone else and post up progress pics.
This'll be my first proper attempt at a 'big' woodworking project, so all help is genuinely appreciated.
I have access to:
* A Makita jigsaw
* Chisel set (+ honing guide and whetstone)
* Handsaws
* Clamps
* Drill
* Finishing Sander (with 120 paper)
* Other grades of sandpaper
* Woodglue
6
Comments
Do you have an idea of the sort of thing you want to make?
If you're after doing something like this...
...then the easiest way to do it that I can think of is to get some pre-cut pine board from the hardware store, sand it, put the marks on and then finish it with a nice stain.
Here's a fairly decent how to page.
https://www.wilkerdos.com/2013/06/diy-growth-chart-ruler/
"But it doesn't matter, because it's just a ride. And we can change it any time we want. It's only a choice. No effort, no work, no job, no savings of money. Just a simple choice, right now, between fear and love." - Bill Hicks
Another thing you can try is to trace the letters on and very lightly score the outline with a razor/exacto knife and use a stain pen of a contrasting colour to the main body stain. Scoring with a knife helps prevent the stain from bleeding over the lines.
It is however recomended to practice on scrap wood to get the "feel" of doing it.
I literally had a ton of pallet wood that I used to build side tables, head/foot boards, reproduction antique ice boxes (which made awesome change tables for our daughters). I still have one of them in the house.
I finally cut a lot of the wood up to be burnt as hidden nails wreaked havoc on my planer knives.
Enjoy your project!!
My thoughts for the numbers and letters was to get my wife to hand draw them on and I'll chisel them out and then stain the numbers darker than the chart itself.
I could get a router and some bits, but I want to keep the cost down for now.
I have one for counter top work but I mostly use it for rounding edges over. The bit size is limited to the hole in the base (unless you enlarge it a little. Some trimmer bases are also designed to accept template guides.
I like the trimmer as it is small and quite easy to control in tight spots.
For larger jobs I have a 1/2" Bosch mounted in my table saw extension and an old porter cable with both 1/4" and 1/2" collets.
A good hand held rotary tool with a flexible extension is also good to have. They're great for pumpkin carving too.
I totally understand trying to minimize project costs, but decent domestic hardwood lumber at a real lumberyard (not the big box store) isn't that expensive. Ash, hickory, maple, oak are all under $4/bdft at my local yard - that's 4/4 rough, but they'll plane to 3/4" actual and joint both edges (surfaced 4 sides, or "S4S") for another $1/bdft. So a 6-foot long, 4-inch wide piece of brand-new lumber is under $10. If I factor in the time I'm going to spend on the project, buying quality wood is the cheap part. Adapting the above to the UK, Robbins Timber sells boards S4S planed to 18mm x 75mm, a 2m long piece of ash or oak or maple are all under £10.
If you're planning to chisel out all those lines & numbers, given your "rubbish DIY skills" I suggest buying a second board in the same material for plenty of practice. That level of detail may require more time & skill than you currently have.
@Lenny I have thought of using printed numbers and letters as templates, but my wife enjoys drawing so I was hoping we could enjoy doing it together.
I've watched a few chisel videos for numbers and letters, so I'll practice it on some pallet wood tonight and post up my thoughts/results.
I'll get everyone's thoughts on what wood to buy in November when I start working on the final version.
If chiseling is too hard, then I may simply go with @MrGrimm and burn them in. I'm a very fast learner on many things, which will hopefully serve me well here. Or it might not and I'll adapt as appropriate.
I like the idea of having your wife paint them in...makes it a joint project, which is pretty cool. I grew up with the wood-burn thing...I personally don't like the look that much, but that is probably from one too many cub-scout project growing up.
I would go for a belt sander before a router...you can hold it in a vise and move the wood over it to round edges, smooth flat surfaces, etc.. It makes quick work and is easier to learn to use than a router, and more versatile.
And use a good quality wood with no knots. Knots are hard to work around unless you know what you are doing, and a few dollars more spent on good quality wood is well worth it.
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep.
I'll buy a set of 5 planks and keep two for the 'final' version. I'll practice different number/letter methods on the other 3 planks and it'll give me a consistency when I come to the final version.
In preparation, I've begun honing the new chisels I bought.
If in the future you plan on using plywood sheets and decide to keep woodworking as a hobby, I would recommend looking for a used panel saw like they have in the big box stores for cutting sheets for customers.
I picked one up locally for $200 did a little work to it but it sure makes cutting sheets down easy. The one I got is an old DeWalt 3480 made with a wooden frame.
Once I adjusted it, it's accurate to 1/32" across a 4' cut. You can also find plans online if you want to build one. I like the fact I don't have to wrestle with the cumbersome sheets once they are in the saw and since I build cabinets, I go through plenty of them. It doesn't take up much space which is the main reason I bought it.
What at will you be using for a finish on your project? Will you be spraying or brushing the finish on?
What's your thoughts on the following router? http://www.screwfix.com/p/energer-enb468rou-1200w-router-230-240v/
1/3 the price of the handheld laminate cutters, but takes same 1/4 cutting bits. Has quite a lot of decent reviews and and I can justify £37 (versus £90+).
I'll be heading to Wickes on my lunch break to look at their wood stock, so I'll take pics of stock and prices to get everyone's feedback before I buy any.
I'd like to try woodworking so I can build things my family can use for years to come (and it's a life skill I can - hopefully - pass down to my son in years to come).
I was thinking I may paint them, but perhaps staining or varnishing them is better? Any preferences? I'm all ears and willing to listen to all feedback from the pros
I've had good luck finding quality hand tools at yard/garage sales and local classified ads and the prices have been pennies on the dollar. I have also bought old furniture for next to nothing and taken it apart and recycled the wood into other projects.
Painting or stain and varnish are a personal preference. Consider using the same wood and finish as the trim in the house. You said the project would be around for many years. Just a thought.
Edit. Wrong thread. Oops.
"But it doesn't matter, because it's just a ride. And we can change it any time we want. It's only a choice. No effort, no work, no job, no savings of money. Just a simple choice, right now, between fear and love." - Bill Hicks
My wife pissy at me spending my money on them without "asking her first". I just raised an eyebrow and asked her if she still wanted to decorate them or not and left it at that.
My wife has agreed to decorate each one for the kids and I won't have room for the Blu-Ray discs. But, I can hang off a metal USB drive on each year and this will contain both the animated photo slideshow of their best pics, but also a folder of ALL pics we have of them for that year.
My tools won't go to waste, as I need to modify my son's cot to enable my MIL to take him out and put him in the cot without bending over and I'll also male my son his bed when he grows out of his cot.